Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® MV 3000 SP 01 - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® MV 3000 SP 01:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Polyether block Pebax® MV 3000 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.

This SP grade is specifically designed for outdoor application that needs excellent weather resistance properties.


Main applications:
  • Breathable membranes


Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração - / 45 MPa ISO 527
Tensão a 50% de deformação - / 7 MPa ISO 527
Deformação na ruptura - / >50 % ISO 527
Dureza Shore D 35 / * - ISO 7619-1
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 158 / * °C ISO 11357-1/-3
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 28 / * % Sim. to ISO 62
Absorção de umidade 1 / * % Sim. to ISO 62
Densidade 1020 / 1020 kg/m³ ISO 1183
Características
Processamento
Extrusão de laminas, Outros tipos de extrusão, Calandragem, Extrusão de filmes planos
Forma de entrega
Granulos
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Outras informações
Outros tipos de extrusão

Processing conditions:

- Cast Film - Typical melt temperature : 240 - 250°C.
- Blown Film - Typical melt temperature : 190 - 210°C.
- Coating - Typical melt temperature : 240 - 250°C.
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 70-80°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.