Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RESOMER® C 209 - PCL - Evonik Operations GmbH

Material Data Center offers the following functions for RESOMER® C 209:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Resomer datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades térmicas
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Bioresorbable polymers to enhance the performance of medical devices.

Degradation timeframe: > 2 years

Applications: orthopedic, cardiovascular, wound healing


Inherent viscosity range: 0,8-1,2 dL/g

Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 65 °C ISO 11357-1/-3
Temp. de transição vítrea, 10 °C/min -62 °C ISO 11357-1/-2
Características
Características especiais
Esterilizável, Esterilização por óxido de etileno (EtO), Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Certifications
Contém recursos renováveis, Biodegradável, Grau médico, Drug Master File, Device Master File
Aplicaciones
Médico
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.