Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® FMNO - PA11 - ARKEMA

Material Data Center offers the following functions for Rilsan® FMNO:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
PA11
Rilsan® FMNO is a natural Polyamide produced from a renewable source. It is unreinforced and designed for injection molding or melt spinning process.

The percentage of renewable carbon according to ASTM D 6866 is >98%.
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Contração após a moldagem, paralelo 1.1 / * % ISO 294-4, 2577
Contração após a moldagem, perpendicular 1.1 / * % ISO 294-4, 2577
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1220 / 1200 MPa ISO 527
Tensão no escoamento - / 39 MPa ISO 527
Deformação no escoamento - / 5 % ISO 527
Deformação nominal na ruptura - / >50 % ISO 527
Res. impacto Charpy c/entalhe, +23°C 7 / 9 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 8 / 9 kJ/m² ISO 179/1eA
Dureza Shore D 71 / * - ISO 7619-1
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 189 / * °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 42 / * °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 129 / * °C ISO 75-1/-2
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 1.8 / * % Sim. to ISO 62
Absorção de umidade 0.81 / * % Sim. to ISO 62
Densidade 1030 / - kg/m³ ISO 1183
Biobased content 98 % -
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos, Cor natural
Certifications
Contém recursos renováveis
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Outras informações
Moldagem por injeção
Melt spinning process conditions:

- Head & spinning typical melt temperature (Min / Recommended / Max) : 220°C / 230°C - 250°C / 260°C-270°C.


Injection process conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 270°C.
- Mold temperature : 10 - 60°C


Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 60-80°C.


Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.