Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BZM 8 O T3L - PA11-GF8 - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

PA11, MHLR, 18-030, GF8

Rilsan® BZM 8 O T3L is a fiberglass reinforced polyamide 11 produced from a renewable source.
This natural grade is designed for injection. This grade has been engineered and stabilized to improve color stability.

According to ASTM D6866, the biobased carbon content is measured at 100%.

Note that this document is a temporary technical data sheet.

Main applications:

• Spring for quick connectors
• Outsoles

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Características de processamento/físicas	Seco / Cond	Unidade	Método de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR	15 / *	cm³/10min	ISO 1133
Temperatura	235 / *	°C	-
Carga	5 / *	kg	-
Contração após a moldagem, paralelo	1.1 / *	%	ISO 294-4, 2577
Contração após a moldagem, perpendicular	0.8 / *	%	ISO 294-4, 2577

Propriedades mecânicas	Seco / Cond	Unidade	Método de ensaio
ISO Dados
Módulo de tração	- / 2300	MPa	ISO 527
Tensão na ruptura	- / 56	MPa	ISO 527
Deformação na ruptura	- / 26	%	ISO 527
Res. impacto Charpy c/entalhe, +23°C	- / 12	kJ/m²	ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C	- / 7.8	kJ/m²	ISO 179/1eA
Dureza Shore D	73 / *	-	ISO 7619-1

Propriedades térmicas	Seco / Cond	Unidade	Método de ensaio
ISO Dados
Temperatura de fusão, 10°C/min	189 / *	°C	ISO 11357-1/-3

Outras propriedades	Seco / Cond	Unidade	Método de ensaio
Densidade	1080 / 1080	kg/m³	ISO 1183
Biobased content	97	%	-

Diagrama

Características

Processamento

Moldagem por injeção

Forma de entrega

Granulos

Características especiais

Estável a luz, Estabilidade a raios U.V./Intempéries, Estável contra o calor

Certifications

Contém recursos renováveis

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Outras informações

Moldagem por injeção

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 250°C / 270°C / 290°C.
- Mold temperature : 40 - 90°C

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.