Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STIROLAN PS1 - PS - Soredi S.p.a.

Material Data Center offers the following functions for STIROLAN PS1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Stirolan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 15 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Contração após a moldagem, paralelo 0.0065 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração no escoamento 28 MPa ASTM D 638
Resistência à tração na ruptura 25 MPa ASTM D 638
Módulo de flexão 2300 MPa ASTM D 790
Resistência à flexão 52 MPa ASTM D 790
Dureza Rockwell R 80 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 67.3 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 38.4 J/m ASTM D 256
Temperatura -20 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Coef. de expansão térmica linear, perpend. 90 E-6/K ISO 11359-1/-2
ASTM Dados
UL94 flamabilidade HB - UL 94
Espessuras do tubo de teste 1.6 mm -
DTUL @ 264 psi 78 °C ASTM D 648
Temperatura de amolecimento Vicat 84 °C ASTM D 1525
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Constante dielétrica, 1MHz 2.5 - IEC 62631-2-1
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de umidade 0.1 % Sim. to ISO 62
Densidade 1040 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção
Características especiais
Alto impacto.
Aplicaciones
Polivalente
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.