Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tarnamid® T-27 TSL 4 - PA6 - Grupa Azoty S.A.

Material Data Center offers the following functions for Tarnamid® T-27 TSL 4:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tarnamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 70 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carga 5 / * kg -
Contração após a moldagem, paralelo 2.0 / * % ISO 294-4, 2577
Contração após a moldagem, perpendicular 1.5 / * % ISO 294-4, 2577
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 221 / * °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 55 / * °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 170 / * °C ISO 306
Flamabilidade a espessura h HB / * class IEC 60695-11-10
Espessuras do tubo de teste 3.2 / * mm -
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 9.5 / * % Sim. to ISO 62
Absorção de umidade 3 / * % Sim. to ISO 62
Densidade 1050 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulado, Negro, Cor natural
Características especiais
Alto impacto.
Aplicaciones
Automóvel, Construção, Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.