Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Terraprene® SI 801 65A - SEBS-MX... - FKuR Kunststoff GmbH

Material Data Center offers the following functions for Terraprene® SI 801 65A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Terraprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
more information can be found in the following table
Rilsamid® Chemical Resistance
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Deformação na ruptura 255 % ISO 37
Dureza Shore A 65 - ISO 7619-1
Outras propriedadesValorUnidadeMétodo de ensaio
Biobased content 65 % -
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 60 °C -
Pré-secagem - tempo 2 - 4 h -
Temperatura do molde 25 - 40 °C -
Temperatura - zona de alimentação 60 °C -
Zona 1 160 °C -
Zona 2 180 °C -
Zona 3 190 °C -
Temperatura do bico 200 °C -
Tempo de residência máximo 5 min -
Características
Processamento
Moldagem por injeção
Características
Copolímero
Certifications
Contém recursos renováveis
Aplicaciones
Brinquedos
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.