View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of THERMOLAST® K TF6BTL - TPE - KRAIBURG TPE GmbH & Co. KG

Material Data Center offers the following functions for THERMOLAST® K TF6BTL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Thermolast datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Propriedades mecânicas - Outras propriedades - Recomendação de processamento Moldagem por injeção

Any use of this information falls under the rules of our disclaimer.

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Resistência à tração

MPa

ISO 37

Deformação na ruptura

770

ISO 37

Resistência ao rasgamento

14.4

kN/m

ISO 34-1

Dureza Shore A

ISO 7619-1

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	880	kg/m³	ISO 1183

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Pré-secagem - temperatura	60 - 80	°C	-
Pré-secagem - tempo	2 - 4	h	-
Pressão de injeção	20 - 100	MPa	-
Contrapressão	2 - 10	MPa	-
Pressão de recalque	8 - 60	MPa	-
Tempo de residência máximo	10	min	-

Características

Processamento

Moldagem por injeção

Características especiais

Translucent

Características

Boa adesão

Certifications

Contacto com alimentos, Aprovação para contacto com alimentos10/2011, Aprovação de alimentos FDA 21 CFR

Aplicaciones

Embalaje

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.