Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ TX1801 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ TX1801:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastman Tritan™ TX1801 copolyester is an amorphous copolyester specifically developed for use in blow molding applications. Eastman Tritan™ Copolyester TX1801 contains a mold release derived from vegetable based sources.

Its most outstanding features are excellent toughness, hydrolytic stability, heat resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ Copolyester TX1801 may be used in repeated use food contact articles under United States Food and Drug

Administration (FDA) regulations.

Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.006 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1570 MPa ISO 527
Tensão no escoamento 45 MPa ISO 527
Deformação no escoamento 7 % ISO 527
Tensão na ruptura 51 MPa ISO 527
Deformação na ruptura 142 % ISO 527
Módulo de flexão, 23°C 1490 MPa ISO 178
Resistência à flexão 60 MPa ISO 178
Impacto Izod com entalhe, +23°C 78 kJ/m² ISO 180/1A
Impacto Izod com entalhe 12 kJ/m² ISO 180/1A
Temperatura -40 °C -
ASTM Dados
Módulo de tração 1609 MPa ASTM D 638
Resistência à tração no escoamento 45 MPa ASTM D 638
Resistência à tração na ruptura 52 MPa ASTM D 638
Alongamento no escoamento 7 % ASTM D 638
Deformação na ruptura 139 % ASTM D 638
Módulo de flexão 1522 MPa ASTM D 790
Dureza Rockwell R 110 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 842 J/m ASTM D 256
Resistência ao Impacto Izod, 1/8 in N J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 66 psi 101 °C ASTM D 648
DTUL @ 264 psi 85 °C ASTM D 648
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 1 % ASTM D 1003
Transmitância luminosa 91 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1180 kg/m³ ASTM D 792
Características
Processamento
Moldagem por sopro
Forma de entrega
Cor natural
Aditivos
Desmoldante
Características especiais
Alto impacto., Estável contra o calor, Transparente
Características
Amorfo, Copolímero
Resistência Química
Resistência química geral, Estabilidade hidrolítica
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.