Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ TXF1021 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ TXF1021:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastman Tritan™ Copolyester TXF1021 is an amorphous, opaque material offering UL-94 V2 performance with outstanding aesthetics and gloss. Eastman Tritan™ Copolyester TXF1021 has many outstanding features that include excellent toughness, hydrolytic stability, heat resistance, chemical resistance, and melt flowability.

Eastman Tritan™ Copolyester TXF1021 offers improved design flexibility needed in portable consumer electronic devices. Eastman Tritan™ Copolyester TXF1021 has passed FDA/ISO 10993 testing for skin sensitization. Eastman Tritan™ Copolyester TXF1021 contains a non-halogenated flame retardant.

Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.006 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 1611 MPa ASTM D 638
Resistência à tração no escoamento 42 MPa ASTM D 638
Resistência à tração na ruptura 46 MPa ASTM D 638
Alongamento no escoamento 6 % ASTM D 638
Deformação na ruptura 133 % ASTM D 638
Módulo de flexão 1743 MPa ASTM D 790
Dureza Rockwell R 109 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 436 J/m ASTM D 256
Resistência ao Impacto Izod, 1/8 in N J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
UL94 flamabilidade V-2 - UL 94
Espessuras do tubo de teste 1.5 mm -
DTUL @ 66 psi 94 °C ASTM D 648
DTUL @ 264 psi 83 °C ASTM D 648
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1190 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 88 °C -
Pré-secagem - tempo 4 - 6 h -
Temperatura da massa 260 - 282 °C -
Temperatura do molde 38 - 66 °C -
Características
Processamento
Moldagem por injeção
Forma de entrega
Cor natural
Aditivos
Anti-chama
Características especiais
Retardante de chama, Sem halogéneo, Estável contra o calor, Opaque
Características
Amorfo, High Gloss, Copolímero
Resistência Química
Resistência química geral, Estabilidade hidrolítica
Aplicaciones
Elétrica e Eletrônica
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.