Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESPEL® TP-8161 - PI - DuPont

Material Data Center offers the following functions for VESPEL® TP-8161:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vespel datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração 80 MPa ASTM D 638
Deformação na ruptura 3 % ASTM D 638
Resistência à flexão 154 MPa ASTM D 790
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Flamabilidade 5V a espessura h 5VA class IEC 60695-11-20
Espessuras do tubo de teste 2.0 mm -
ASTM Dados
UL94 flamabilidade V-0 - UL 94
Espessuras do tubo de teste 0.4 mm -
DTUL @ 264 psi 295 °C ASTM D 648
Índice de oxigênio 47 % ASTM D 2863
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Fator de dissipação dielétrica, 1 MHz 0.003 - ASTM D 150
Constante dielétrica, 1 MHz 3.1 - ASTM D 150
Resistividade superficial específica >1E15 Ohm ASTM D 257
Resistividade volumétrica específica >1E15 Ohm*cm ASTM D 257
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1350 kg/m³ ASTM D 792
Características
Forma de entrega
Cor natural
Características especiais
Estável contra o calor
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.