Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® 1000 P - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® 1000 P:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Unreinforced, low-viscosity polyether ether ketone powder

VESTAKEEP® 1000 P is an unreinforced, low-viscosity polyether ether ketone powder. The product is suitable for the manufacture of compounds or it can be used as scatterpowder for the manufacture of composites.

The semi-crystalline polymer features superior thermal and chemical resistance.
Parts made from VESTAKEEP® 1000 P are of low flammability.

VESTAKEEP® 1000 P is supplied as a powder in boxes with moisture-proof polyethylene liners.

Pigmentation may affect values.

For information about processing of VESTAKEEP® 1000 P, please follow the general recommendations in our brochure “VESTAKEEP® Polyether Ether Ketone.“

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT  WWW.INDUSTRIAL.VESTAKEEP.COM
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 150 cm³/10min ISO 1133
Temperatura 380 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 3900 MPa ISO 527
Tensão no escoamento 100 MPa ISO 527
Deformação no escoamento 5.5 % ISO 527
Deformação nominal na ruptura 10 % ISO 527
Resistência ao impacto Charpy , +23°C 60 kJ/m² ISO 179/1eU
Type of failure C - -
Resistência ao impacto Charpy, -30°C 60 kJ/m² ISO 179/1eU
Type of failure C - -
Res. impacto Charpy c/entalhe, +23°C 5 kJ/m² ISO 179/1eA
Type of failure C - -
Res. impacto Charpy c/entalhe, -30°C 5 kJ/m² ISO 179/1eA
Type of failure C - -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 340 °C ISO 11357-1/-3
Temp. de transição vítrea, 10°C/min 150 °C ISO 11357-1/-2
Temperatura de deflexão térmica, 1.80 MPa 155 °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 205 °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 310 °C ISO 306
Flamabilidade a 1.5mm esp. nom. V-0 class IEC 60695-11-10
Espessuras do tubo de teste 1.6 mm -
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1300 kg/m³ ISO 1183
Características
Processamento
Revestimento, Moldagem por transferência
Forma de entrega
Pó
Características
Estabilidade térmica
Resistência Química
Resistência química geral
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.