Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTOSINT® 1141 white 9.1123 - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTOSINT® 1141 white 9.1123:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vestosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão no escoamento 42 MPa ISO 527
Deformação no escoamento 6 % ISO 527
Deformação na ruptura 100 % ISO 527
Dureza Shore D 75 - ISO 7619-1
Ball indentation hardness 101 MPa ISO 2039-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 176 °C ISO 11357-1/-3
Coef. de expansão térmica linear, paralelo 104 E-6/K ISO 11359-1/-2
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 1E12 Ohm*m IEC 62631-3-1
Resistência elétrica 85 kV/mm IEC 60243-1
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de umidade 0.5 % Sim. to ISO 62
Densidade 1060 kg/m³ ISO 1183
Bulk density 520 kg/m³ -
Características
Processamento
Revestimento
Forma de entrega
Pó, Branco
Certifications
Contacto com alimentos
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.