Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® 22HSPCN BK0815 - PA66 - Ascend

Material Data Center offers the following functions for Vydyne® 22HSPCN BK0815:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Vydyne 22HSPCN BK0815 is a general-purpose, unfilled, lubricated, heat stabilized PA66 resin. Designed principally for injection-molding fabrication, this product offers a combination of engineering properties characterized by high strength; rigidity; good toughness; high melt point; good surface lubricity; abrasion resistance; and resistance to many chemicals, machine and motor oils, solvents and gasoline. This product is designed to resist thermal degradation when exposed to warm climates.
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 3100 / 1600 MPa ISO 527
Tensão no escoamento 89 / 57 MPa ISO 527
Deformação no escoamento 4.8 / 20 % ISO 527
Resistência ao impacto Charpy , +23°C N / N kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C N / N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 4.1 / 11 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 2.8 / 2.7 kJ/m² ISO 179/1eA
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 260 / * °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 70 / * °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 208 / * °C ISO 75-1/-2
Espessuras do tubo de teste 1.5 / * mm -
Flamabilidade a espessura h V-2 / * class IEC 60695-11-10
Espessuras do tubo de teste 0.7 / * mm -
Flamabilidade conforme índice de oxigênio 24 / * % ISO 4589-1/-2
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Resistência elétrica 29 / - kV/mm IEC 60243-1
Índice comparativo de linha de fuga 500 / - - IEC 60112
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Densidade 1140 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos, Negro
Aditivos
Lubrificantes
Características especiais
Estável contra o calor
Resistência Química
Resistência química geral, Resistência aos solventes, Resistência a óleos
Aplicaciones
Polivalente
Disponibilidade regional
Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.