Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® PA6620FA - PA66-AF20 - Ascend

Material Data Center offers the following functions for Vydyne® PA6620FA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Vydyne PA6620FA is a 20% aramid fiber reinforced PA66 for injection molded applications.
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Tensão no escoamento 85 / - MPa ISO 527
Módulo de flexão, 23°C 4000 / - MPa ISO 178
Resistência à flexão 122 / - MPa ISO 178
Resistência ao Impacto Izod, +23°C 40 / - kJ/m² ISO 180/1U
Impacto Izod com entalhe, +23°C 5 / - kJ/m² ISO 180/1A
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 80 °C -
Pré-secagem - tempo 4 h -
Umidade do processamento ≤0.2 % -
Temperatura da massa 270 - 280 °C -
Temperatura do molde 60 - 100 °C -
Zona 1 265 - 275 °C -
Zona 2 270 - 280 °C -
Zona 3 270 - 280 °C -
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos
Aditivos
Lubrificantes, Desmoldante
Disponibilidade regional
América do Norte, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.