Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R435H NT0774 - PA66-GF35 - Ascend

Material Data Center offers the following functions for Vydyne® R435H NT0774:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Vydyne R435H NT0774, is designed to reinforce downgauged steel and aluminum used in vehicle body-in-white (BIW) structures, helping reduce weight without sacrificing safety or comfort.
R435H NT0774 has improved energy absorption over traditional glass-filled PA66, helping reduce noise, vibration and harshness (NVH) and absorbing impact energy from crashes. Using the new grade in the BIW structure reinforces sheet metal, helping manufacturers shave substantial weight and improve efficiency. Trends in lightweight and NVH are becoming even more paramount with the growth of Electric Vehicles.  R435H NT0774 has excellent properties to support applications where this will be of prime importance such as battery frames and housings.
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Contração após a moldagem, paralelo 0.3 / * % ISO 294-4, 2577
Contração após a moldagem, perpendicular 1.0 / * % ISO 294-4, 2577
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 11200 / 8400 MPa ISO 527
Tensão na ruptura 185 / 135 MPa ISO 527
Deformação na ruptura 3.5 / 4.5 % ISO 527
Resistência ao impacto Charpy , +23°C 100 / 110 kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C 110 / 100 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 19 / 24 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 15 / 16 kJ/m² ISO 179/1eA
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 260 / * °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 250 / * °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 261 / * °C ISO 75-1/-2
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Resistência elétrica 41 / 36 kV/mm IEC 60243-1
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 1 / * % Sim. to ISO 62
Absorção de umidade 1.4 / * % Sim. to ISO 62
Densidade 1400 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos, Cor natural
Aditivos
Lubrificantes
Características especiais
Alto impacto., Estável contra o calor
Aplicaciones
Encapsulamento
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.