Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ADVANCENE™ EE-1801-BSB - (PE-LLD) - Egyptian Ethylene and Derivatives Company

Material Data Center offers the following functions for ADVANCENE™ EE-1801-BSB:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Advancene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades - Propriedades do filme
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
Other Standards[S]
Índice de fluidez, MFI 1 g/10min
Temperatura 190 °C -
Carga 2.16 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades térmicasValorUnidadeMétodo de ensaio
Other Standards[S]
Temperatura de fusão 120 °C
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 47 - ASTM D 2457
Haze 9 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 918 kg/m³ ASTM D 792
Propriedades do filmeValorUnidadeMétodo de ensaio
ASTM Data
Resistência à tração na ruptura, long. 57 MPa ASTM D 882
Resistência à tração na ruptura, trans. 38 MPa ASTM D 882
Deformação na ruptura, long. 590 % ASTM D 882
Deformação na ruptura, trans. 860 % ASTM D 882
Tipo de extrusão blown - -
Espessura de corpo de prova 0.03 mm -
Características
Processamento
Extrusão de filme soprado, Extrusão de laminas
Aditivos
Agente antibloqueio
Características
Propriedades de barreira, Mistura de resina, Good Drawdown
Certifications
Contacto com alimentos
Aplicaciones
Embalaje
Disponibilidade regional
Europa, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.