View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Armlen® PP MF 25-2TS - PP-MF25 - R&P Polyplastic

Material Data Center offers the following functions for Armlen® PP MF 25-2TS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Armlen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção

Any use of this information falls under the rules of our disclaimer.

Informação do produto

For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.

Características de processamento/físicas

Valor

Unidade

Método de ensaio

ISO Dados

Índice de fluidez, MFI

g/10min

ISO 1133

Temperatura

250

°C

Carga

2.16

Contração após a moldagem, paralelo

0.9

ISO 294-4, 2577

Contração após a moldagem, perpendicular

0.9

ISO 294-4, 2577

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Tensão no escoamento

MPa

ISO 527

Deformação na ruptura

ISO 527

Resistência ao impacto Charpy, +23°C

kJ/m²

ISO 179/1eU

Propriedades térmicas

Valor

Unidade

Método de ensaio

ISO Dados

Temperatura de fusão, 10°C/min

162

°C

ISO 11357-1/-3

Temperatura de deflexão térmica, 1.80 MPa

°C

ISO 75-1/-2

Temperatura de deflexão térmica , 0.45 MPa

126

°C

ISO 75-1/-2

Coef. de expansão térmica linear, paralelo

E-6/K

ISO 11359-1/-2

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1060	kg/m³	ISO 1183

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Temperatura da massa	230	°C	-
Temperatura do molde	60	°C	-

Características

Processamento

Moldagem por injeção

Características

Estabilidade térmica

Disponibilidade regional

Europa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.