View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC RF 9/15 - UP-(MD+GF)70 - Polynt S.p.A.

Material Data Center offers the following functions for BMC RF 9/15:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades

Any use of this information falls under the rules of our disclaimer.

Informação do produto

Not resistant. May be used under certain conditions (brief contact).

Please consider the information about the application of the materials.

Características de processamento/físicas

Valor

Unidade

Método de ensaio

ISO Dados

Contração após a moldagem, paralelo

0.2

ISO 294-4, 2577

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Resistência ao impacto Charpy, +23°C

kJ/m²

ISO 179/1eU

Dureza Rockwell

M 80

ISO 2039-2

Other Standards^[S]

Módulo de flexão, 23°C

9000

MPa

ISO 14125A

Resistência à flexão

MPa

ISO 14125A

S:	These properties are reported by the producer according standards that are different to our defaults.

Propriedades térmicas

Valor

Unidade

Método de ensaio

ISO Dados

Flamabilidade a espessura h

V-0

class

IEC 60695-11-10

Espessuras do tubo de teste

3.0

Cartão Amarelo (yellow card) disponível

sim

Glow Wire Flammability Index (GWFI)

960

°C

IEC 60695-2-12

Propriedades elétricas

Valor

Unidade

Método de ensaio

ISO Dados

Resistividade volumétrica específica

1E12

Ohm*m

IEC 62631-3-1

Resistividade superficial específica

1E14

Ohm

IEC 62631-3-2

Resistência elétrica

kV/mm

IEC 60243-1

ASTM Dados

Resistência ao arco

180

ASTM D 495

Outras propriedades	Valor	Unidade	Método de ensaio
Absorção de água	0.2	%	Sim. to ISO 62
Densidade	1800	kg/m³	ISO 1183

Características

Processamento

Moldagem por compressão

Forma de entrega

Composto de moldagem em massa

Características especiais

Retardante de chama, Sem halogéneo

Aplicaciones

Elétrica e Eletrônica

Disponibilidade regional

Europa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.