Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYROLITE® CG-97 - MBS - Röhm GmbH

Material Data Center offers the following functions for CYROLITE® CG-97:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Cyrolite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades - Diagrama
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Productprofil:

CYROLITE CG-97 compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications.

 

Typical properties of CYROLITE® acrylic-based multipolymer compounds are:


• excellent chemical resistance to fats and oils
• excellent bonding and welding capabilities
• excellent bonding to PVC tubing
• good impact strength
• good light transmission
• good resistance to EtO, gamma and E-beam sterilization

 

The special properties of CYROLITE CG-97 compound are:


• superior resistance to lipids
• excellent gamma sterilization color stability
• high impact resistance
• very good resistance to alcohol

Application:

Used for injection molding and extrusion of medical devices.

Example:

Needle hubs, IV, lab and pediatric filters.

Processing:

CYROLITE CG-97 compound can be processed in injection molding machines and extrusion lines with 3- zone general purpose screws.

Physical Form / Packaging:

Available in 1500 lb. gaylord boxes; other packaging available on request.

Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 0.54 cm³/10min ISO 1133
Temperatura 230 °C -
Carga 3.8 kg -
Densidade do fundido 820 kg/m³ -
Temperatura de ejeção 62 °C -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1700 MPa ISO 527
Tensão no escoamento 35 MPa ISO 527
Deformação no escoamento 3.9 % ISO 527
Deformação nominal na ruptura 23 % ISO 527
Resistência ao impacto Charpy , +23°C 190 kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C 100 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 14.2 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 7.6 kJ/m² ISO 179/1eA
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 79 °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 82 °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 82.1 °C ISO 306
Propriedades ópticasValorUnidadeMétodo de ensaio
ISO Data
Transmitância luminosa 89 % ISO 13468-1, -2
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1090 kg/m³ ISO 1183
Diagrama
Viscosidade - taxa de cisalhamento , CYROLITE® CG-97, MBS, Röhm
Tensão de cisalhamento - taxa de cisalhamento , CYROLITE® CG-97, MBS, Röhm
Tensão - deformação , CYROLITE® CG-97, MBS, Röhm
Módulo secante - deformação , CYROLITE® CG-97, MBS, Röhm
Características
Processamento
Moldagem por injeção, Outros tipos de extrusão
Forma de entrega
Granulos
Características especiais
Alto impacto., Transparente, Esterilizável, Esterilização por óxido de etileno (EtO), Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Características
Estabilidade de cor, Boa adesão, Soldável
Resistência Química
Resistência à gordura, Resistência a óleos
Aplicaciones
Médico
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Outras informações
Moldagem por injeção
PREPROCESSING
Predrying temperature: max. 70 °C
Predrying time : 3 - 4 h
PROCESSING
Melt temperature: 215 - 250°C
Mold temperature:50 - 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.