Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastosil® LR 3043/60 A/B - VMQ - Wacker Chemie AG

Material Data Center offers the following functions for Elastosil® LR 3043/60 A/B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastosil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência à tração 8.8 MPa ISO 527
Deformação na ruptura >50 % ISO 527
Resistência ao rasgamento 15 kN/m ISO 34-1
Dureza Shore A 60 - ISO 7619-1
ASTM Dados
Resistência ao rasgamento 40 kN/m ASTM D 624
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica >1E13 Ohm*m IEC 62631-3-1
Resistência elétrica 23 kV/mm IEC 60243-1
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1140 kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Características especiais
Transparente
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.