Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Evoprene® Super G 622 - TPE - Alphagary

Material Data Center offers the following functions for Evoprene® Super G 622:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Evoprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência à tração 9.4 MPa ISO 37
Deformação na ruptura 531 % ISO 37
Deformação permanente por compressão a 70°C, 24h 34 % ISO 815
Deformação permanente por compressão a 100°C, 24h 50 % ISO 815
Dureza Shore A 76 - ISO 7619-1
Other Standards[S]
Tensão em 100% de alongamento 3.1 MPa ISO 37
Tensão em 300% de alongamento 16.8 MPa ISO 37
Resistência ao rasgamento 40 kN/m ISO 6383
Resistência à abrasão 181 mm³ DIN 53516
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Flamabilidade a espessura h V-0 class IEC 60695-11-10
Espessuras do tubo de teste 6.0 mm -
Flamabilidade conforme índice de oxigênio 26 % ISO 4589-1/-2
Outras propriedadesValorUnidadeMétodo de ensaio
Other Standards[S]
Densidade 1140 kg/m³ ISO 2781
S: These properties are reported by the producer according standards that are different to our defaults.
Características
Processamento
Moldagem por injeção
Disponibilidade regional
América do Norte, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.