Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Haiplen H30 G10 BA - PP-GF50 - Taro Plast S.p.A.

Material Data Center offers the following functions for Haiplen H30 G10 BA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Haiplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 4 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão na ruptura 85 MPa ISO 527
Deformação na ruptura 3 % ISO 527
Módulo de flexão, 23°C 7400 MPa ISO 178
ASTM Dados
Impacto Izod com entalhe, 1/8 in 125 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 150 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 165 °C ISO 306
Temperatura de amolecimento Vicat, B 145 °C ISO 306
Flamabilidade a espessura h HB class IEC 60695-11-10
Espessuras do tubo de teste 3.2 mm -
ASTM Dados
UL94 flamabilidade HB - UL 94
Espessuras do tubo de teste 1.6 mm -
Índice de oxigênio 21 % ASTM D 2863
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.1 % Sim. to ISO 62
Densidade 1340 kg/m³ ISO 1183
Características
Forma de entrega
Granulos
Características especiais
Estabilidade a raios U.V./Intempéries, Estável contra o calor
Características
Impressora a laser, Baixo odor, Homopolímero
Aplicaciones
Automóvel, Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.