View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RamTough PZ726 - PC - Polyram

Material Data Center offers the following functions for RamTough PZ726:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ramtough datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades

Any use of this information falls under the rules of our disclaimer.

Características de processamento/físicas

Valor

Unidade

Método de ensaio

ISO Dados

Índice de fluidez, MFI

g/10min

ISO 1133

Temperatura

300

°C

Carga

1.2

Contração após a moldagem, paralelo

0.7

ISO 294-4, 2577

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ISO Dados

Tensão no escoamento

MPa

ISO 527

Deformação na ruptura

120

ISO 527

Módulo de flexão, 23°C

2400

MPa

ISO 178

Impacto Izod com entalhe, +23°C

kJ/m²

ISO 180/1A

ASTM Dados

Resistência à flexão

MPa

ASTM D 790

Propriedades térmicas

Valor

Unidade

Método de ensaio

ISO Dados

Temperatura de deflexão térmica, 1.80 MPa

130

°C

ISO 75-1/-2

Flamabilidade a 1.5mm esp. nom.

V-2

class

IEC 60695-11-10

Espessuras do tubo de teste

1.6

ASTM Dados

Temperatura de amolecimento Vicat

148

°C

ASTM D 1525

Propriedades elétricas

Valor

Unidade

Método de ensaio

ISO Dados

Resistividade volumétrica específica

1E13

Ohm*m

IEC 62631-3-1

Resistividade superficial específica

1E15

Ohm

IEC 62631-3-2

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1200	kg/m³	ISO 1183

Características

Processamento

Moldagem por injeção

Forma de entrega

Granulos

Características especiais

Alto impacto., Estabilidade a raios U.V./Intempéries

Características

Baixo odor

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.