Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SCHULAKETON GF 15 - PK-GF15 - LyondellBasell Industries

Check here, which other Schulaketon datasheets, application examples or technical articles are available in Material Data Center

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Características de processamento/físicas	Valor	Unidade	Método de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR	6	cm³/10min	ISO 1133
Temperatura	240	°C	-
Carga	2.16	kg	-

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Módulo de tração	4500	MPa	ISO 527
Tensão na ruptura	85	MPa	ISO 527
Deformação na ruptura	4	%	ISO 527
Resistência ao impacto Charpy , +23°C	60	kJ/m²	ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C	10	kJ/m²	ISO 179/1eA

Propriedades térmicas	Valor	Unidade	Método de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa	207	°C	ISO 75-1/-2

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1340	kg/m³	ISO 1183

Diagrama

Características

Processamento

Moldagem por injeção

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.