Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Spectar™ - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Spectar™:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Spectar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastman Spectar™ Clear is a copolyester, developed by Eastman to achieve measurably improved sheet clarity and edge color while maintaining the performance characteristics for which Eastman Spectar™ copolyester has become known in the industry. It offers the thermoformability and ease of fabrication of Eastman Spectar™ copolyester along with significantly improved clarity. Eastman Spectar™ Clear also offers approximately double the notch impact strength, 50% higher instrumented impact strength and better chemical resistance when compared

to traditional Spectar™ Copolyester.




Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 1800 MPa ASTM D 638
Resistência à tração no escoamento 48 MPa ASTM D 638
Resistência à tração na ruptura 53 MPa ASTM D 638
Alongamento no escoamento 5 % ASTM D 638
Deformação na ruptura 340 % ASTM D 638
Módulo de flexão 2000 MPa ASTM D 790
Dureza Rockwell R 107 - ASTM D 785
Impacto Izod com entalhe, 1/8 in N J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 83 J/m ASTM D 256
Temperatura -30 °C -
Resistência ao Impacto Izod, 1/8 in N J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
UL94 flamabilidade HB - UL 94
Coeficiente de expansão térmica, long. 76.2 E-6/K ASTM D 696
DTUL @ 66 psi 77 °C ASTM D 648
DTUL @ 264 psi 73 °C ASTM D 648
Temperatura de amolecimento Vicat 86 °C ASTM D 1525
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Resistividade superficial específica 1E17 Ohm ASTM D 257
Resistividade volumétrica específica 1E16 Ohm*cm ASTM D 257
Resistência ao arco 130 s ASTM D 495
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 150 - ASTM D 2457
Haze 0.5 % ASTM D 1003
Transmitância luminosa 91 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água, 24hr 0.19 % ASTM D 570
Densidade 1230 kg/m³ ASTM D 792
Características
Processamento
Extrusão de chapas, Termoformagem
Características especiais
Alto impacto., Transparente
Características
Baixo odor, Copolímero
Resistência Química
Resistência química geral
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.