Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Titalon 1100ST N01 - PA6 - Titan Plastics Compounds Co., Ltd.

Material Data Center offers the following functions for Titalon 1100ST N01:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Titalon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
For more detailed information, please read our
or contact our representatives in your region.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência à tração 50 MPa ISO 527
Módulo de flexão, 23°C 1920 MPa ISO 178
Resistência à flexão 73 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 30 kJ/m² ISO 179/1eA
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 155 °C ISO 75-1/-2
Flamabilidade a espessura h HB class IEC 60695-11-10
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 1E12 Ohm*m IEC 62631-3-1
Resistividade superficial específica 1E14 Ohm IEC 62631-3-2
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1050 kg/m³ ISO 1183
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 80 - 100 °C -
Pré-secagem - tempo 4 h -
Temperatura da massa 230 - 260 °C -
Temperatura do molde 60 - 100 °C -
Características
Processamento
Moldagem por injeção
Forma de entrega
Cor natural
Características especiais
Alto impacto.
Disponibilidade regional
Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.