Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint™ TPU 88A - TPU - BASF

Material Data Center offers the following functions for Ultrasint™ TPU 88A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades - 3D Data
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Dureza Shore A 89 - ISO 7619-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 135 °C ISO 11357-1/-3
Temp. de transição vítrea, 10 °C/min -48 °C ISO 11357-1/-2
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1100 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
3D DataValorUnidadeMétodo de ensaio
Other Standards[S]
Módulo de tração, flat 75 MPa ISO 527
Módulo de tração, upright 75 MPa ISO 527
Resistência à tração, flat 8 MPa ISO 527
Resistência à tração, upright 7 MPa ISO 527
Deformação na ruptura, flat 270 % ISO 527
Deformação na ruptura, upright 130 % ISO 527
Módulo de flexão, flat 70 MPa ISO 178
Módulo de flexão, upright 70 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C, flat 0 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, +23°C, upright 0 kJ/m² ISO 179/1eA
Temperatura de amolecimento Vicat, A, flat 98 °C ISO 306
Temperatura de amolecimento Vicat, A, upright 98 °C ISO 306
S: These properties are reported by the producer according standards that are different to our defaults.
Características
Processamento
Additive Manufacturing, Sinterização a laser
Forma de entrega
Pó, Branco
Características especiais
Estabilidade a raios U.V./Intempéries
Resistência Química
Estabilidade hidrolítica
Aplicaciones
Equipo deportivo
Disponibilidade regional
América do Norte, Europa, America Centra e do Sul
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.