Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VECTRA® E115i - LCP-GF15 - Celanese

Check here, which other Vectra datasheets, application examples or technical articles are available in Material Data Center

Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

15% glass reinforced Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant. FDA compliant UL-Listing V-0 black at 0.75mm thickness per UL 94 flame testing. UL = Underwriters Laboratories (USA)

Flammability at thickness h (0.75 mm)

V-0

UL recognition (h)

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Módulo de tração	13000	MPa	ISO 527
Tensão na ruptura	160	MPa	ISO 527
Deformação na ruptura	2	%	ISO 527
Res. impacto Charpy c/entalhe, +23°C	66	kJ/m²	ISO 179/1eA

Propriedades térmicas	Valor	Unidade	Método de ensaio
ISO Dados
Temperatura de fusão, 10°C/min	335	°C	ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa	260	°C	ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa	298	°C	ISO 75-1/-2
Temperatura de amolecimento Vicat, B	202	°C	ISO 306
Flamabilidade a espessura h	V-0	class	IEC 60695-11-10
Espessuras do tubo de teste	0.8	mm	-
Cartão Amarelo (yellow card) disponível	sim	-	-

Propriedades elétricas	Valor	Unidade	Método de ensaio
ISO Dados
Constante dielétrica, 1MHz	3.4	-	IEC 62631-2-1
Fator de dissipação dielétrica, 1MHz	0.034	E-4	IEC 62631-2-1
Resistividade volumétrica específica	>1E13	Ohm*m	IEC 62631-3-1
Resistividade superficial específica	>1E15	Ohm	IEC 62631-3-2
Resistência elétrica	33	kV/mm	IEC 60243-1

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1460	kg/m³	ISO 1183

Diagrama

Características

Forma de entrega

Negro

Características especiais

Retardante de chama

Certifications

Contacto com alimentos, Aprovação de alimentos FDA 21 CFR

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.