View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Visico™ LE4423/LE4460/LE4432 - PE - Borealis A/S

Material Data Center offers the following functions for Visico™ LE4423/LE4460/LE4432:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Visico datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Características de processamento/físicas - Propriedades mecânicas - Propriedades elétricas - Outras propriedades - Recomendação de processamento Extrusão

Any use of this information falls under the rules of our disclaimer.

Características de processamento/físicas

Valor

Unidade

Método de ensaio

ASTM Dados

Índice de fluidez, MFI

0.9

g/10min

ASTM D 1238

Temperatura

190

°C

Carga

2.16

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ASTM Dados

Resistência à tração na ruptura

16.5

MPa

ASTM D 412

Deformação na ruptura

300

ASTM D 412

Propriedades elétricas

Valor

Unidade

Método de ensaio

ASTM Dados

Resistência elétrica, tempo curto

kV/mm

ASTM D 149

Fator de dissipação dielétrica, 60 Hz

0.0005

ASTM D 150

Constante dielétrica, 60 Hz

2.5

ASTM D 150

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	923	kg/m³	ASTM D 792

Recomendação de processamento Extrusão	Valor	Unidade	Método de ensaio
Zona 1	146	°C	-
Zona 2	163	°C	-
Zona 3	171	°C	-
Zona 4	171	°C	-
Temperatura do bico	177	°C	-

Características

Processamento

Extrusão cabo, Outros tipos de extrusão

Forma de entrega

Negro

Aditivos

Desativador metálico

Características especiais

Retardante de chama, Estabilidade a raios U.V./Intempéries

Características

Reticulável, Estabilidade térmica

Resistência Química

Resistência à oxidação

Aplicaciones

Elétrica e Eletrônica

Disponibilidade regional

América do Norte, Europa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.