Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VYPET VNT 645 - PET-GF45 - Lavergne

Material Data Center offers the following functions for VYPET VNT 645:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vypet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Contração após a moldagem, paralelo 0.4 % ISO 294-4, 2577
Contração após a moldagem, perpendicular 1.0 % ISO 294-4, 2577
ASTM Dados
Contração após a moldagem, paralelo 0.004 mm/mm ASTM D 955
Contração após a moldagem, perpendicular 0.01 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão na ruptura 160 MPa ISO 527
Módulo de flexão, 23°C 13000 MPa ISO 178
Impacto Izod com entalhe, +23°C 8.5 kJ/m² ISO 180/1A
ASTM Dados
Resistência à tração na ruptura 160 MPa ASTM D 638
Módulo de flexão 14000 MPa ASTM D 790
Resistência à flexão 240 MPa ASTM D 790
Impacto Izod com entalhe, 1/8 in 90 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 230 °C ISO 75-1/-2
ASTM Dados
DTUL @ 264 psi 230 °C ASTM D 648
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1680 kg/m³ ISO 1183
Densidade 1680 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção
Características especiais
Estável contra o calor
Aplicaciones
Elétrica e Eletrônica
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.