Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CarbonX™ Carbon Fiber Nylon (Gen3) - PA*-CF20 - 3DXTECH

Material Data Center offers the following functions for CarbonX™ Carbon Fiber Nylon (Gen3):
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other CarbonX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Теплофизические свойства - Электрические свойства - Прочие свойства - 3D Data
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура стеклования, 10 °C/мин 70 °C ISO 11357-1/-2
Температура изгиба под нагрузкой, 0.45 МПа 147 °C ISO 75-1/-2
Электрические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Удельное поверхностное сопротивление 1E9 Ом IEC 62631-3-2
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1170 кг/м³ ISO 1183
3D DataЗначениеЕдиницаСтандарт
Модуль упругости при растяжении, flat 3800[1] МПа -
Напряжение при разрыве, flat 63[1] МПа -
Удлинение при разрыве, flat 3[1] % -
Модуль упругости при изгибе, flat 3750[1] МПа -
Предел прочности при изгибе, flat 84[1] МПа -
1: 45°-45°
Особые свойства и характеристики
Способы переработки
Additive Manufacturing
Вид поставки
Моноволокно, Черный
Доступность материала по регионам
Северная Америка, Латинская Америка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.