Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® MH 1657 - TPA - ARKEMA

Material Data Center offers the following functions for Pebax® MH 1657:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Polyether block amide Pebax® MH 1657 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
Pebax® MH 1657 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part.
This hydrophilic grade when extruded into either a thin film or laminated on to a substrate also offers excellent permeability to moisture vapor while remaining waterproof.


Main applications:
  • Breathable membranes
  • Permanent antistactic additive


Packaging:

This grade is delivered dried in sealed packaging (25 kg bags and 550 kg rigid containers) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Механические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 90 / 80 МПа ISO 527
Напряжение при 50% удлинении 13 / 12 МПа ISO 527
Удлинение при разрыве >50 / >50 % ISO 527
Твердость по Шору D 40 / * - ISO 7619-1
Теплофизические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 204 / * °C ISO 11357-1/-3
Температура стеклования, 10°C/мин -40 / * °C ISO 11357-1/-2
Электрические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Удельное объемное сопротивление - / 2E7 Ом*м IEC 62631-3-1
Удельное поверхностное сопротивление * / 1.5E9 Ом IEC 62631-3-2
Прочие свойствасухой / кондЕдиницаСтандарт
Водопоглощение 120 / * % Sim. to ISO 62
Поглощение влаги 4.5 / * % Sim. to ISO 62
Плотность 1140 / - кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Литье под давлением, Пленочная экструзия, Экструзия профилированных изделий, Экструзия (прочие виды), Литьевое прессование, Отливка, Термоформование
Вид поставки
Гранулы
Особые показатели
Повышенная электропроводность, Антистатический, Термостабилизированный или стойкий к воздействию тепла
Доступность материала по регионам
Другая текстовая информация
Литье под давлением

Injection molding process conditions:

- Typical melt temperature (Min / Recommended / Max): 230°C / 240°C / 260°C.
- Typical mold temperature: 25–60°C.
- Drying time and temperature (only necessary for bags/containers opened for more than two hours): 5-7 hours at 70-90°C.
Экструзия других изделий

Extrusion process conditions:

- Typical melt temperature (Min / Recommended / Max): 230°C / 250°C / 280°C.
- Drying time and temperature (only necessary for bags/containers opened for more than two hours): 5-7 hours at 70-90°C.
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.