Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ GX100 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ GX100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта

Eastman Tritan™ GX100 copolyester is a clear plastic that is increasingly popular for protective barriers used to limit the spread of viruses like COVID-19, including sneeze guards where durability and resistance to harsh disinfectants is crucial. Tritan GX100 is a good alternative to polycarbonate (PC) and acrylic (PMMA) for heavy gauge sheet.

Tritan GX100 can be found in a variety of heavy-gauge sheet end uses, including sneeze guards, separation barriers, outdoor signs, displays/in-store fixtures and heat-sensitive applications in hospitals, office buildings, schools, and retailers. It has glasslike clarity and is free of materials of concern, including BPA.

Hospitals prefer Tritan due to its resistance to harsh disinfectants, including Super Sani-Cloth® wipes, Virex®, and a variety of other common hospital cleaning agents. This allows Tritan to resist breakage and discoloration, therefore lasting longer than other alternatives.

Tritan GX100 is also the material of choice for outdoor signs and other end uses that require high durability and heat resistance.

Механические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Предел текучести 45 МПа ASTM D 638
Предел прочности 46 МПа ASTM D 638
Удлинение в точке текучести 7 % ASTM D 638
Относительное удлинение при разрыве 133 % ASTM D 638
Модуль упругости при изгибе 1483 МПа ASTM D 790
Твердость по Роквеллу R 114 - ASTM D 785
Ударная вязкость (Izod) с надрезом, образец с надрезом, 1/8 in или 3,17 мм 1010 J/m ASTM D 256
Ударная вязкость по Изоду при низкой темп., образец с надрезом , при низкой температура 133 J/m ASTM D 256
Температура -30 °C -
Ударная вязкость по Изоду, 1/8 in или 3,17 мм N J/m ASTM D 256
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Температура прогиба под нагрузкой (66 фунт/дюйм2) 99.2 °C ASTM D 648
Температура прогиба под нагрузкой (264 фунт/дюйм2) 90.9 °C ASTM D 648
Температура размягчения по Вика 110 °C ASTM D 1525
Прочие свойстваЗначениеЕдиницаСтандарт
Водопоглощение, 24hr 0.18 % ASTM D 570
Плотность 1180 кг/м³ ASTM D 792
Особые свойства и характеристики
Способы переработки
Экструзия листа, Термоформование
Особые показатели
Термостабилизированный или стойкий к воздействию тепла, Прозрачный
Специальные характеристики
Барьерные свойства, Термостойкость, Сополимер
Применение
Автомобилестроение, Строительство зданий и сооружений, Электрические и электронные устройства
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.