Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UTTAP™ - SF 50020 GF - PESU-GF20 - Ovation Polymers

Material Data Center offers the following functions for UTTAP™ - SF 50020 GF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Uttap datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Механические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Модуль упругости при растяжении 6500 МПа ASTM D 638
Предел текучести 125 МПа ASTM D 638
Относительное удлинение при разрыве 3.2 % ASTM D 638
Модуль упругости при изгибе 8200 МПа ASTM D 790
Ударная вязкость (Izod) с надрезом, образец с надрезом, 1/8 in или 3,17 мм 75 J/m ASTM D 256
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Температура прогиба под нагрузкой (264 фунт/дюйм2) 205 °C ASTM D 648
Температура стеклования 224 °C ASTM E 1356
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1520 кг/м³ ASTM D 792
Особые свойства и характеристики
Химическая стойкость
Общая химическая стойкость
Доступность материала по регионам
Северная Америка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.