Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® 4000 FP - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® 4000 FP:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Технологические и физические свойства - Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Unreinforced, high-viscosity polyether ether ketone fine powder

VESTAKEEP® 4000 FP is an unreinforced, highviscosity polyether ether ketone fine powder. It can be used as a basic resin or in blends with different additives for manufacturing compression molding parts.

The semi-crystalline polymer features superior thermal and chemical resistance. VESTAKEEP® 4000 FP is of low flammability.

VESTAKEEP® 4000 FP is supplied as powder in boxes with moisture-proof polyethyleneliners.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For guidance processing of VESTAKEEP® 4000 FP please follow the general recommendations in our brochure  “VESTAKEEP® High Performance in Powder Form Polyether Ether Ketone Powders“.

Pigmentation may affect values.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM  OR VISIT OUR PRODUCT AT  WWW.INDUSTRIAL.VESTAKEEP.COM
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Показатель текучести расплава, ПТР 11 см³/10мин ISO 1133
Температура 380 °C -
Нагрузка 5 kg -
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 3500 МПа ISO 527
Напряжение в точке текучести 96 МПа ISO 527
Удлинение в точке текучести 5 % ISO 527
Номинальное удлинение при разрыве 30 % ISO 527
Ударная вязкость по Шарпи, +23°C N кДж/м2 ISO 179/1eU
Ударная вязкость по Шарпи, -30°C N кДж/м2 ISO 179/1eU
Ударная вязкость по Шарпи с надрезом, +23°C 7 кДж/м2 ISO 179/1eA
Type of failure C - -
Ударная вязкость по Шарпи с надрезом, -30°C 6 кДж/м2 ISO 179/1eA
Type of failure C - -
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 340 °C ISO 11357-1/-3
Температура изгиба под нагрузкой, 1.80 МПа 150 °C ISO 75-1/-2
Температура изгиба под нагрузкой, 0.45 МПа 205 °C ISO 75-1/-2
Температура размягчения по Вика, B 305 °C ISO 306
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1300 кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Литьевое прессование, Прессование
Вид поставки
Порошок
Специальные характеристики
Смеси полимерных материалов
Химическая стойкость
Общая химическая стойкость
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.