Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of HIVAL® FLLH18 010 HH - (PE-LLD) - Nexeo Plastics, LLC

Material Data Center offers the following functions for HIVAL® FLLH18 010 HH:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hival datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Технологические и физические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Показатель текучести расплава, ПТР 0.95 г/10 мин ASTM D 1238
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 919 кг/м³ ASTM D 792
Особые свойства и характеристики
Способы переработки
Пленочная экструзия
Специальные характеристики
Сополимер, Сополимер гексена
Сертификаты
Контакт с пищей, Одобрен для контакта с пищей FDA 21 CFR
Доступность материала по регионам
Северная Америка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.