Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® ROTO 11 NATURAL - PA11 - ARKEMA

Material Data Center offers the following functions for Rilsan® ROTO 11 NATURAL:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта

PA11-P,RDHL,C12-010


Rilsan® ROTO 11 NATURAL resin is a polyamide 11 powder produced from a renewable source. This natural grade is designed for Rotomolding.

 



ARM Impact Strength:
73 °F    140 ft-lbs
 -40 °F    60 ft-lbs

Mechanical properties:
Testing was performed on rotational molded test specimens.

Main applications:
Rotational molding - Rotomolded tanks.

Packaging:
This grade is delivered in 100 lb drums ready to be processed.




Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Механические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 965 / - МПа ISO 527
Напряжение в точке текучести 43 / - МПа ISO 527
Удлинение в точке текучести 31 / - % ISO 527
Номинальное удлинение при разрыве >50 / - % ISO 527
Ударная вязкость по Шарпи с надрезом, +23°C 7.5 / - кДж/м2 ISO 179/1eA
Теплофизические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 185 / * °C ISO 11357-1/-3
Прочие свойствасухой / кондЕдиницаСтандарт
Плотность 1050 / 1050 кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Ротационное формование
Вид поставки
Порошок, Натуральный цвет
Добавки
Пластификатор
Особые показатели
Светостабилизироанный или стойкий к свету, Термостабилизированный или стойкий к воздействию тепла
Сертификаты
Содержит возобновляемые ресурсы
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.