Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UDCarbon® 90 CF60-12K - EP-CF60 - Polynt S.p.A.

Material Data Center offers the following functions for UDCarbon® 90 CF60-12K:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other UDCarbon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Технологические и физические свойства - Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Усадка при литье, продольная -0.1 % ISO 294-4, 2577
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 110000 МПа ISO 527
предел прочности при растяжении 1000 МПа ISO 527
Ударная прочность по Шарпи, +23°C 130 кДж/м2 ISO 179/1eU
Other Standards[S]
Модуль упругости при изгибе, 23°C 80000 МПа ISO 14125
Предел прочности при изгибе 1050 МПа ISO 14125
S: These properties are reported by the producer according standards that are different to our defaults.
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура стеклования, 10 °C/мин 150 °C ISO 11357-1/-2
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1510 кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Прессование
Вид поставки
Полиэфирный листовой прессматериал
Применение
Автомобилестроение
Доступность материала по регионам
Европа
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.