Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Anjatech® PC/PBT R010/50-E - (PC+PBT) - almaak international GmbH

Material Data Center offers the following functions for Anjatech® PC/PBT R010/50-E:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Anjatech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 20 cm³/10min ISO 1133
温度 260 °C -
载荷 2.16 kg -
机械性能价值单位Test Standard
ISO数据
简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 30 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
维卡软化温度, B 110 °C ISO 306
其它性能价值单位Test Standard
吸水性 0.5 % 类似ISO 62
吸湿性 0.15 % 类似ISO 62
密度 1220 kg/m³ ISO 1183
典型数据
供货形式
黑色
特殊性能
高冲击韧性的/经抗冲改性的
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.