Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of BMC A50 XHS - UP-GF23 - LyondellBasell Industries

Material Data Center offers the following functions for BMC A50 XHS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other BMC datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
模压收缩率, 平行 0.0025 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
屈服应力 65.5 MPa ASTM D 638
压缩强度 131 MPa ASTM D 695
弯曲模量 1241 MPa ASTM D 790
弯曲强度 131 MPa ASTM D 790
洛克硬度 M75 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 747 J/m ASTM D 256
悬臂梁缺口冲击强度, 1/4 in 107 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 V-0 - UL 94
测试厚度 1.57 mm -
DTUL @ 66 psi 134 °C ASTM D 648
DTUL @ 264 psi 126 °C ASTM D 648
熔点 218 °C ASTM D 3418
玻璃化转变温度 145 °C ASTM E 1356
维卡温度 151 °C ASTM D 1525
比热 1370 J/(kg K) ASTM C 351
其它性能价值单位Test Standard
吸水率, 24小时 0.15 % ASTM D 570
密度 1890 kg/m³ ASTM D 792
典型数据
加工方法
注塑
供货形式
块状模材料
特殊性能
阻燃的
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.