Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bergaflex® BFI 60D-358 - TPS - Avient Corporation

Material Data Center offers the following functions for Bergaflex® BFI 60D-358:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Bergaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Resistant. Negligible, reversible or no changes in mass and dimensions.

Please consider the information about the application of the materials.
机械性能价值单位Test Standard
ISO数据
100%应变时的应力 12.1 MPa ISO 527
300%应变时的应力 13.2 MPa ISO 527
断裂应力 TPE 21 MPa ISO 527
断裂应变. TPE >300 % ISO 527
肖氏硬度D 60 - ISO 7619-1
其它性能价值单位Test Standard
密度 1190 kg/m³ ISO 1183
试样制备条件价值单位Test Standard
ISO数据
注塑, 熔体温度 180 °C ISO 294
注塑, 模具温度 30 °C ISO 294
典型数据
加工方法
注塑, 薄膜挤出成型, 异型材挤出成型, 其它挤出成型, 吹塑, 压延成型
供货形式
粒料
特殊性能
经耐紫外线处理的/耐气候的
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.