Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CALIBRE™ MEGARAD™ 2081-22 - PC - Trinseo

Material Data Center offers the following functions for CALIBRE™ MEGARAD™ 2081-22:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Calibre Megarad datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 22 g/10min ASTM D 1238
温度 300 °C -
负载 1.2 kg -
模压收缩率, 平行 0.006 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
屈服应力 64.1 MPa ASTM D 638
断裂拉伸强度 46.9 MPa ASTM D 638
断裂伸长率 180 % ASTM D 638
悬臂梁缺口冲击强度, 1/8 in 747 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
DTUL @ 264 psi 123 °C ASTM D 648
光学特性价值单位Test Standard
ASTM数据
光透射率 85 % ASTM D 1003
其它性能价值单位Test Standard
密度 1200 kg/m³ ASTM D 792
典型数据
加工方法
注塑
添加剂
脱模助剂
特殊性能
透明.
耐化学试剂
抗辐射性
应用
药物
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.