Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ChronoFlex C® 80A - TPU - AdvanSource Biomaterials

Material Data Center offers the following functions for ChronoFlex C® 80A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Chronoflex C datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 其它性能 - 加工推荐（注塑） - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
For more detailed information, please read our brochure p. 46 to 54
or contact our representatives in your region.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 14 g/10min ASTM D 1238
温度 205 °C -
负载 3.26 kg -
机械性能价值单位Test Standard
ASTM数据
拉伸强度 46.5 MPa ASTM D 638
断裂伸长率 400 % ASTM D 638
邵氏硬度A 80 - ASTM D 2240
其它性能价值单位Test Standard
吸水率, 平衡 1 % ASTM D 570
加工推荐（注塑）价值单位Test Standard
预干燥-温度 71.1 - 93.3 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.05 % -
注塑熔体温度 199 - 221 °C -
1区 149 - 171 °C -
2区 154 - 177 °C -
3区 182 - 204 °C -
喷嘴温度 188 - 210 °C -
加工推荐（挤出）价值单位Test Standard
预干燥-温度 71.1 - 93.3 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.05 % -
注塑熔体温度 199 - 221 °C -
1区 149 - 171 °C -
2区 154 - 177 °C -
3区 182 - 204 °C -
喷嘴温度 188 - 210 °C -
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料
耐化学试剂
通用耐化学性, 耐环境应力裂纹性
Certifications
生物相容, 医用级, Biocompatibility ISO 10993, US药物六级认证
应用
药物
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.