Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Clearblend® 145 - MBS - INEOS Styrolution

Material Data Center offers the following functions for Clearblend® 145:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Clearblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 3.5 cm³/10min ISO 1133
温度 200 °C -
载荷 5 kg -
模塑收缩率, 平行 0.4 % ISO 294-4, 2577
ASTM数据
熔融指数, MFI 3.5 g/10min ASTM D 1238
温度 200 °C -
负载 5 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2240 MPa ISO 527
屈服应力 28 MPa ISO 527
弯曲模量, 23°C 2280 MPa ISO 178
ASTM数据
拉伸模量 2241 MPa ASTM D 638
屈服应力 27.6 MPa ASTM D 638
断裂伸长率 40 % ASTM D 638
弯曲模量 2275 MPa ASTM D 790
弯曲强度 55.2 MPa ASTM D 790
洛克硬度 M 80 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 53.4 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
维卡温度 97.8 °C ASTM D 1525
光学特性价值单位Test Standard
ASTM数据
雾度 2 % ASTM D 1003
光透射率 90 % ASTM D 1003
折射率 1.57 - ASTM D 542
其它性能价值单位Test Standard
吸水性 0.1 % 类似ISO 62
密度 1040 kg/m³ ISO 1183
吸水率, 平衡 0.1 % ASTM D 570
密度 1040 kg/m³ ASTM D 792
典型数据
加工方法
注塑
特殊性能
高冲击韧性的/经抗冲改性的, 消毒, 环氧乙烷灭菌(EtO), Gamma irradiation sterilization
特征
共聚物
耐化学试剂
抗辐射性
Certifications
可食品接触的, 10/2011认证, FDA 21 CFR认证, 医用级, Biocompatibility ISO 10993, US药物六级认证, Drug Master File, Long term supply assurance
应用
药物
地区供应
北美, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.