Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DURAFIDE® 6565A7 - PPS-(GF+MD)60 - Polyplastics

Check here, which other Durafide datasheets, application examples or technical articles are available in Material Data Center

机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

机械性能	价值	单位	Test Standard
ISO数据
拉伸强度	140	MPa	ISO 527
断裂伸长率	1	%	ISO 527
弯曲模量, 23°C	20500	MPa	ISO 178
弯曲强度	220	MPa	ISO 178
简支梁缺口冲击强度, +23°C	7.5	kJ/m²	ISO 179/1eA
洛克硬度	M 95	-	ISO 2039-2

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	275	°C	ISO 75-1/-2
线性热膨胀系数, 平行	10	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	30	E-6/K	ISO 11359-1/-2
厚度为h时的燃烧性	V-0	class	IEC 60695-11-10
Yellow Card 现存	是的	-	-

电性能	价值	单位	Test Standard
ISO数据
相对介电常数, 1MHz	4.7	-	IEC 62631-2-1
介质损耗因子, 1MHz	60	E-4	IEC 62631-2-1
体积电阻率	7E13	Ohm*m	IEC 62631-3-1
介电强度	16	kV/mm	IEC 60243-1
相对漏电起痕指数	175	-	IEC 60112
ASTM数据
耐电弧性	181	s	ASTM D 495

其它性能	价值	单位	Test Standard
密度	1890	kg/m³	ISO 1183

函数

典型数据

特征

好粘附性能

地区供应

亚太

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.