Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Edgetek™ ET3500-5002 BK - (ASA+PC)-GF12 - Avient Corporation

Material Data Center offers the following functions for Edgetek™ ET3500-5002 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Edgetek datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 14.5 cm³/10min ISO 1133
温度 300 °C -
载荷 21.6 kg -
熔融指数, MFI 19.5 g/10min ISO 1133
温度 300 °C -
负载 2.16 kg -
ASTM数据
模压收缩率, 平行 0.0015 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
拉伸模量 5900 MPa ISO 527
断裂应力 100 MPa ISO 527
断裂伸长率 2.2 % ISO 527
简支梁冲击强度, +23°C 37 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 8 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 HB - UL 94
电性能价值单位Test Standard
ASTM数据
表面电阻率 1E14 Ohm ASTM D 257
体积电阻率 1E15 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
密度 1230 kg/m³ ISO 1183
吸水率, 24小时 0.15 % ASTM D 570
典型数据
供货形式
粒料
特征
低翘曲
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.