Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ERACLENE® MR 80 U - (PE-HD) - Versalis S.p.A

Material Data Center offers the following functions for ERACLENE® MR 80 U:
unit conversion, PDF datasheet print, comparison with other plastics, flow length calculation, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Eraclene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 函数
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Eraclene MR 80 U is a high density polyethylene with antioxidants, suitable for injection moulding application.
Eraclene MR 80 U shows a good balance between processability and mechanical properties.

Applications
The grade is specifically designed for houseware and thin-walled containers.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 18 cm³/10min ISO 1133
温度 190 °C -
载荷 2.16 kg -
熔体密度 733 kg/m³ -
熔体 0.32 W/(m K) -
熔体的比热 3180 J/(kg K) -
喷射温度 100 °C -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1250 MPa ISO 527
屈服应力 27 MPa ISO 527
屈服伸长率 10.5 % ISO 527
名义断裂伸长率 >50 % ISO 527
肖氏硬度D 65 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 132 °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 115 °C ISO 11357-1/-2
线性热膨胀系数, 平行 152 E-6/K ISO 11359-1/-2
其它性能价值单位Test Standard
密度 954 kg/m³ ISO 1183
函数
粘度－剪切速度 , ERACLENE® MR 80 U, (PE-HD), Versalis
剪切应力－剪切速度 , ERACLENE® MR 80 U, (PE-HD), Versalis
比容－温度(pvT) , ERACLENE® MR 80 U, (PE-HD), Versalis
典型数据
加工方法
注塑
供货形式
粒料
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型
#2
Typical processing temperature range:

    Melt temperature         190 - 260 °C

    Mold temperature          10-  40  °C

权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.