Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® FX72T6 - PPS - Celanese

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Fortron^® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding.
The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

Flammability at thickness h (3 mm)

V-0

-

加工/物理特性	价值	单位	Test Standard
ISO数据
模塑收缩率, 平行	1.3	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.3	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	1680	MPa	ISO 527
断裂应力	40	MPa	ISO 527
断裂伸长率	20	%	ISO 527
无缺口简支梁冲击强度, +23°C	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	10	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	100	°C	ISO 75-1/-2
维卡软化温度, B	122	°C	ISO 306
厚度为h时的燃烧性	V-0	class	IEC 60695-11-10
测试用试样的厚度	3.0	mm	-
燃烧性－氧指数	48.5	%	ISO 4589-1/-2

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 1MHz	3.1	-	IEC 62631-2-1
介质损耗因子, 1MHz	3	E-4	IEC 62631-2-1

其它性能	价值	单位	Test Standard
密度	1180	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑

特殊性能

高冲击韧性的/经抗冲改性的

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.