Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Histif 5431 Z - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Histif 5431 Z:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Histif datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 其它性能 - 模塑测量的特殊性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 2.6 g/10min ISO 1133
温度 190 °C -
负载 21.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1200 MPa ISO 527
屈服应力 27 MPa ISO 527
屈服伸长率 8 % ISO 527
简支梁缺口冲击强度, -30°C 80 kJ/m² ISO 179/1eA
其它性能价值单位Test Standard
密度 954 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
模塑测量的特殊性能价值单位Test Standard
ISO数据
粘数. 500 cm³/g ISO 307, 1157, 1628
典型数据
加工方法
吹塑
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的
耐化学试剂
耐环境应力裂纹性, 抗氧化性
Certifications
可食品接触的, 1935/2004/EC认证, 10/2011认证, FDA 21 CFR认证, US药物六级认证
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.